Georgia Tech seal

Forfatter/Opretter:

Georgia Tech/Francis P. Smith

Kredit:

The Georgia Tech Communications & Marketing Department

Shortlink:

https://dkwiki.dk/b/1df4f

kilde:

Wikimedia Commons

størrelse:

250 x 250 Pixel (53799 Bytes)

beskrivelse:

Vector based (SVG) version of Georgia Tech's seal. The seal was approved by Georgia Tech for use on April 24, 1918, and originated with Professor Francis P. Smith, head of the Department of Architecture until 1922. The seal is Georgia Tech's oldest trademark, and is a registered trademark of Georgia Tech through the Georgia Board of Regents.^[1]

“

The center of the seal consists of a shield bearing the old university gate in Athens, a symbol adopted by the University System of Georgia and by the State itself. Above the shield burns an eternal flame symbolizing knowledge. The shield is surrounded by the gearwheel of technology. The banner across the bottom of the shield proclaims the Institute’s motto: progress and service. The words “Seal of the Georgia Institute of Technology” and the school’s date of founding, 1885, encircle the design. (Prior to the Institute’s official name change in 1948, the inscription read "Georgia School of Technology.")[2]

”

It is the most formal of the Institute's marks and is reserved for use by the Office of the President. The seal is also used on official Institute documents such as diplomas and for significant campus signage. Georgia Tech units are not permitted to use the seal as part of their visual identity.

In addition, Georgia Tech places conditions on the use of its marks. These conditions are separate from copyright restrictions. Among these are the following:

• Trademarks and logos are to be accurately reproduced and must appear in the exact form as registered, including the appropriate trademark designation and may not be altered without the expressed consent of the Office of Institute Communications and Public Affairs.^[3]
• Authorized colors are gold (PMS 124), metallic gold (PMS 874), navy (PMS 539), and black. The Georgia Tech word mark should be printed in metallic gold (PMS 874) and black. Buzz should be printed in gold (PMS 124) and black. Buzz must have the following white areas; dot in eye, teeth, wings, wristbands, and soles and circles on shoes. When considering the use of any color other than the authorized colors, contact the Licensing Department.^[1]

These conditions are satisfied.

Licens:

Public domain

Kommentar på licensen:

Public domain due to age

restriktioner:

trademarked|insignia